language

News Center

Create an intelligent pipeline

Curved Tube Pressure Balance Corrugated Compensator

Metal Hose news

Elbow news

High Pressure Resin Hose news

Structural Features of Steel Wire Spiral Drilling Rubber Hose

Release time:

2021-09-15

Compared with ordinary hoses, hoses with reinforcing layer structure can be divided into cloth hoses, braided hoses, winding hoses, and knitted hoses according to the structure of the reinforcing layer. The structure of non-layered rubber hose can be divided into full rubber hose and composite rubber hose.

Structural Features of Steel Wire Spiral Drilling Rubber Hose

1. Steel Wire Spiral Drilling Rubber Hose is a rubber hose made of rubberized fabric or tape as the skeleton layer. It can be fixed by adding steel wires to the outside of the rubber hose. The feature of the rubber hose is that it is mainly composed of plain weave fabrics. The made-up tape has basically the same warp and weft density and strength. It is staggered by 40 degrees, cut, spliced, and wrapped. The cloth-covered hose has the advantages of simple manufacturing process, strong adaptability to the number of layers of product specifications, and better stiffness of the tube body, but its advantages and disadvantages are low efficiency.
2. Braided hose is a hose made of various wire materials, including fibers and metal wires as the skeleton layer, which is braided. Its characteristic is that its braided layer is generally interwoven according to the balance angle, so the braided hose has good pressure bearing performance and good bending performance.
3. Steel Wire Spiral Drilling Rubber Hose, as the name suggests, is a hose made of various wires, such as fibers or metal wires, as the winding material of the skeleton layer. And the flexural properties are very good, and the production efficiency is high.
4. Knitted hose is a hose made of cotton thread or other fibers as the material of the skeleton layer and made by knitting. The characteristic of the knitted hose is that the knitting thread is interwoven on the inner tube at a certain angle along the axis, and its density is relatively sparse. Due to its structural characteristics, it is not suitable for occasions with high pressure.

The structure of the hose without reinforcement layer is introduced as follows
1. All rubber hose: The so-called all rubber hose is a rubber hose composed of a single rubber component.
2. Composite hose: On the basis of the full rubber hose, it is composed of two layers of rubber.

There is also a Steel Wire Spiral Drilling Rubber Hose with a short fiber blend structure, which is a rubber hose that is uniformly mixed with a rubber material and a short fiber of one to two millimeters, extruded or molded.