language

News Center

Create an intelligent pipeline

Curved Tube Pressure Balance Corrugated Compensator

Metal Hose news

Elbow news

High Pressure Resin Hose news

Standards for Limit Flexible Rubber Joint installation

Release time:

2021-09-15

Limit Flexible Rubber Joint is a new product for connecting pumps, gate valves, pipelines and other facilities with pipelines.

Standards for Limit Flexible Rubber Joint installation

Limit Flexible Rubber Joint is a new product for connecting pumps, gate valves, pipelines and other facilities with pipelines. They are connected to each other according to the anchor bolts, making it a whole with a certain offset. The standard used in the installation of Limit Flexible Rubber Joint can be adjusted according to the on-site installation specifications during the installation and maintenance process. During operation, the radial drive force can be transmitted to all piping system software. This not only improves the efficiency, but also has a certain protective effect on pipeline equipment such as pumps and valves.

Limit Flexible Rubber Joint is used in the installation of the standard Limit Flexible Rubber Joint nut on the pipe to fasten the washer on the gland pipe nut, due to the danger of the steep slope of the other side, the working pressure and the function of connecting the external pipe seal. When the foundation sinks, the pipe can be deflected, and the sealing is not leaked, so as to achieve the purpose of automatic compensation. Loosen half-sleeve deformation joints, expansion joints or welded metal castings, pipe position trapezoidal rings, rubber hydraulic seals, anchor bolts, rubber glands to reduce elastic deformation theoretical application effect, and drive the body's middle packing seal wall to expand and expand the pipe.
Because there is a certain difference in the joint account number between the wavy and swollen tissues of the Limit Flexible Rubber Joint, it has a certain axial and radial offset, which can reasonably fill and relieve the driving force of the pipeline, but it is also very easy I think the installation and maintenance of centrifugal pumps, valves, installation and operation of pipes and replacement of deformation joints are ideal accessories. The installation position of the telescopic tube is generally located at one-half of the total displacement of the product, which is very suitable for the expansion and contraction of the pipeline. During the connection process between the flanges on both sides and the pipeline, the installation of the anchor bolts should be carried out in the form of uniform pressure at the top angle to complete the connection, so as to ensure that the pipeline is fully integrated, so as to ensure the long-term stable operation of the pipeline.